Work at the Club Station

On Monday, December 19, we did a little tower work. We removed some old antennas and did quite a bit of cable removal as well. Part of the work also involved installing a new microwave dish to provide a network link to La Cumbre Peak. As soon as the La Cumbre Peak dish is installed, we’ll have a full time link between the two locations.

Our first installed device will be an ADS-B receiver that will add to our constellation of receivers and provide coverage of the back country below the coastal mountain range. This will help Santa Barbara Search and Rescue obtain real time aircraft location information that is currently unavailable when an aircraft drops below the mountain tops.

Wayne – AF6GX (picture shown) did the tower climbing, Michael – K6RQV provided ground assistance, and Brian – K6BPM programmed and tested the microwave radios.

Post expires at 9:29am on Friday January 20th, 2023 but will still be available in the archives.

Bookmark the permalink.
K6BPM

About Brian K6BPM

President, Santa Barbara Amateur Radio Club 2016-Present

Leave a Reply